Discontinued products

Discontinued product notices

Analytical discontinued products 2022

eVol® digital analytical syringe discontinuation 2022 [PDF]

Analytical discontinued products 2018

Analytical discontinued product list 2018 [PDF]
Discontinuation of SGE HT5 aluminum clad GC capillary columns [PDF]

SGE discontinued products 2017

SGE BP5MS-UI and BP5MS-ULB GC capillary columns were discontinued from 2 June 2017. Where possible, an alternative BPX5 GC column part number has been proposed as a replacement for your column.

Part number Description Alternative part number Description

054330

BP5MS-UI 30 m x 0.25 mm x 0.25 µm

054101

BPX5 30 m x 0.25 mm x 0.25 µm

054330CCS

BP5MS-UI 30 m x 0.25 mm x 0.25 µm – 5" Cage

054101CCS

BPX5 30 m x 0.25 mm x 0.25 µm – 5" Cage

054331

BP5MS-UI 60 m x 0.25 mm x 0.25 µm

054102

BPX5 60 m x 0.25 mm x 0.25 µm

054332

BP5MS-UI 15 m x 0.25 mm x 0.25 µm

054100

BPX5 15 m x 0.25 mm x 0.25 µm

054340

BP5MS-ULB 30 m x 0.25 mm x 0.25 µm

054101

BPX5 30 m x 0.25 mm x 0.25 µm

054341

BP5MS-ULB 60 m x 0.25 mm x 0.25 µm

054102

BPX5 60 m x 0.25 mm x 0.25 µm

SGE discontinued products 2015

SGE discontinued product list 2015 [PDF] 


Replacement parts for discontinued products

eVol® digital analytical syringe

eVol kit

eVol® kits and handles are longer manufactured. Replacement components, syringes and accessories are available.

This product was discontinued from 31 March 2022. Technical support and replacement parts will be available until 31 March 2029.

Part number discontinued Description
2910100 eVol XR starter kit for NMR
2910200 eVol XR starter kit
2910205 eVol XR (handle only)
Part number available Description
eVol components
2910010 eVol stand (acrylic)
2910012 eVol charger
2910030 eVol charging stand
2910040 eVol replacement battery
eVol syringes
2910020 5µL eVol syringe with GT plunger and 5cm 0.5mm OD bevel tipped needle
2910021 5µL eVol syringe with GT plunger. No needle
2910022 50µL eVol syringe with GT plunger and 5cm 0.5mm OD bevel tipped needle
2910023 50µL eVol syringe with GT plunger. No needle
2910024 500µL eVol syringe with GT plunger and 5cm 0.63mm OD bevel tipped needle
2910025 500µL eVol syringe with GT plunger. No needle
2910029 100µL eVol syringe with GT plunger and 5cm 0.5mm OD bevel tipped needle
2910035 1mL eVol syringe with GT plunger and 5cm 0.63mm OD bevel tipped needle
2910037 100µL eVol syringe with GT plunger. No needle
2910320 5µL eVol syringe with GT plunger and 5cm 0.5mm OD bevel tipped needle PK3
2910322 50µL eVol syringe with GT plunger and 5cm 0.5mm OD bevel tipped needle PK3
2910324 500µL eVol syringe with GT plunger and 5cm 0.5mm OD bevel tipped needle PK3
2910329 100µL eVol syringe with GT plunger and 5cm 0.5mm OD bevel tipped needle PK3
2910335 1mL eVol syringe with GT plunger and 5cm 0.63mm OD bevel tipped needle PK3
2910026 500µL eVol MEPS syringe with GT plunger
2910027 50µL eVol MEPS syringe with GT plunger
2910028 100µL eVol MEPS syringe with GT plunger
Replacement needles
036910 Replacement needle for 5µL eVol syringe PK5
038110 Replacement needle for 50µL and 100µL eVol syringe PK5
039110 Replacement needle for 500µL and 1mL eVol syringe PK5
Replacement plungers
2910380 Replacement plunger for 5µL eVol syringe
2910382 Replacement plunger for 50µL eVol syringe
2910383 Replacement plunger for 100µL eVol syringe
2910384 Replacement plunger for 500µL eVol syringe
2910385 Replacement plunger for 1mL eVol syringe
Heated syringe cleaners

The heated syringe cleaner is no longer manufactured. Replacement septa for use with it are available.

Part number Description

041842

7 mm EC Grade Septa, PK50

High efficiency column couplers

The high efficiency column couplers are no longer manufactured. The following spare parts are available.

  • Inert - biocompatible
  • Provide a rigid low dead volume, metal free connection between two components of an HPLC system Ideal for connecting two columns, a column to a guard cartridge or in-line filter
  • Maximum pressure rating: 5,000 psi
  • Thread type: 10-32
Part number Description

0624351

Replacement PEEKsil tubing (1/16" x 175 µm ID x 50 mm), PK5

0730014

Replacement PEEK ferrules, PK10

MS/FID Splitter Kit

The MS/FID Splitter Kit and Fixed Outlet Splitter are no longer available. The following spare parts are available. Not suitable for use with 0.1 mm ID columns.

Part number Description 

073220

Replacement SilTite metal ferrules - 0.4 mm ID, PK10

073221

Replacement SilTite metal ferrules - 0.5 mm ID, PK10

073222

Replacement SilTite metal ferrules - 0.8 mm ID, PK10

073224

Replacement SilTite nuts, PK5

123711

Replacement restrictors - Set A for use with 0.25 mm ID columns, Split ratio 1:1

123712

Replacement restrictors - Set B for use with 0.32 mm and 0.53 mm ID columns, Split ratio 1:1

18614600

Replacement tubing for Fixed Outlet Splitter, Split ratio 1:1, PK2

18614610

Replacement tubing for Fixed Outlet Splitter, Split ratio 1:5, PK2

18614620

Replacement tubing for Fixed Outlet Splitter, Split ratio 1:10, PK2

072662

Replacement 2 hole ferrules for Fixed Outlet Splitter, 0.1-0.25 mm ID columns, PK 10

072664

Replacement 2 hole ferrules for Fixed Outlet Splitter, 0.32 mm ID columns, PK 10

Air Sharp™

The AirSharp™ is a peak-focussing GC accessory that uses ambient temperature compressed air as a coolant to cool a very small area of the capillary column rather than the standard liquid carbon dioxide (CO2) or liquid nitrogen (N2) that are used in many of the currently available cold traps.

Designed to focus individual high boiling, late eluting peaks just prior to the compounds entering the detector, the AirSharp increases the signal-to-noise ratio and sensitivity of individual peaks thereby lowering detection limits and making low-level analyses easier.

The risk of contamination onto the capillary column resulting from excess large volume injections, is also decreased.

This product was discontinued from December 31, 2011. Technical support and replacement parts were available until December 31, 2017.

Cryogenic Trap

Useful for:

  • On-column trace enrichment
  • Air and gas sampling
  • Purge and trap
  • Multidimensional techniques
  • Headspace analysis
  • Splitless injection

Cold Traps use liquid carbon dioxide injected directly into a special Tee fitting surrounding the column. They are suitable for holding components with boiling points equivalent to C7 for 10 to 20 minutes at oven temperatures up to approximately 300°C.

The kit consists of Cold Trap, with pneumatic head switching valve, and all required accessories for installation.

gc-BackFlush System

  • Reduce analysis time
  • Increase column life
  • Less maintenance required on the GC
  • Reduce column bleed deposits on detectors (eg. FID and MS)
  • Removes semi-volatile and non-volatile material from the front end of the capillary column

This product was discontinued from December 31, 2011. Technical support and replacement parts were available until December 31, 2017.

ms NoVent II

5 minute GCMS column changeover 

  • Simple operation
  • Easy installation
  • Faster troubleshooting
  • Direct GC-MS Interface
  • Save 6-12 hours column changeover time

The ms NoVent II is designed to allow column, liner or septum changeover, or column maintenance to be carried out, without the need to shut down the MS.

The ms NoVent II is a fluidic valve. The unique design ensures a helium purge maintains a positive flow from the valve to the atmosphere, when a column is not connected. The valve prevents air entering the MS.

The retrofitted ms NoVent II requires:

  • A Control Unit (same for all GCs)
  • The correct tee for your GC
  • The correct restrictor for your GC (note that for some systems, an adaptor is also supplied with the restrictors)

All three items must be ordered to have a complete ms NoVent II system.

This product was discontinued from December 31, 2011. Technical support and replacement parts were available until December 31, 2017.

ms-OpenSplit

ms-OpenSplit is no longer available. Technical support and replacement parts were available until December 31, 2017.

ms-OpenSplit restrictor/adaptors - MS make and model specific

An instrument specific restrictor must be ordered and installed into the MS interface for correct operation of the ms-OpenSplit. For MS instruments other than HP and Shimadzu, an adaptor for the ms-OpenSplit is also required.

MDS 6890™

This product was discontinued from December 31, 2011. Technical support and replacement parts were available until December 31, 2017.

Olfactory Detector Outlet (ODO II)

  • Identify components by odor or fragrance
  • Ideal for cosmetics, flavors and fragrance industries

The Olfactory Detector Outlet is designed to take the outlet stream from a gas chromatograph and transfer it to a nose cone in which it is mixed with a humidified air stream, allowing the operator to use their nose to identify individual components as they elute from the column. The capillary column flow is simultaneously split to an MS detector (or other detector) for the identification of unkown compounds.

The Olfactory Detector Outlet System contains a glass nose cone, detector transfer tube, humidifier, gas control module, splitter kit and all accessories required for installation.

This product was discontinued from December 31, 2011. Technical support and replacement parts were available until December 31, 2017.

Pyrojector II™

Pyrolysis chromatography is a powerful analytical tool able to thermally crack (fragment) essentially non-volatile molecules into volatile fragments, making them suitable for chromatographic analysis.  It enables a reproducible and characteristc 'fingerprint' to be generated of a non-volatile sample.  The technique can be applied to such varied tasks as the identification of bacteria, paints, rubbers, polymers, and fibres.

The microfurnace is designed to operate at temperature up to 900°C for extended periods, without Curie Point gaps.

Pyrojector II is an economical, continuous mode microfurnace pyrolyzing injection system which is highly reproducible. It is ideally suited for use with High Resolution Capillary GC, with a range of sample introduction systems designed for both liquid and solid samples.

The Pyrojector II is designed to operate on an existing GC injection port. It can easily be removed or attached, as the need arises for pyrolysis analysis. Sample introduction results in immediate pyrolysis and transfer of the breakdown products to the head of the column.

Applications

  • Polymers
  • Plastics
  • Forensic
  • Bacterial analysis
  • Geochemistry
  • Paint/coatings

The Pyrojector II System includes a furnace, adaptor, control module, solid sampling kit, and installation kit.

This product was discontinued from December 31, 2011. Technical support and replacement parts were available until December 31, 2017.

Unitrex™

This product was discontinued from December 31, 2011. Technical support and replacement parts were available until December 31, 2017.

Part number 0932922, UTX-IWG Insulation Wedges Pk10, was discontinued from March 31, 2016.


Instruction manuals

Instruction manuals for obsolete products such as Pyrojector II™ (part number 095000), Olfactory Detector Outlet (ODO II)™ (part number 093510), MS NoVent II™ (part number 113440), gc-Backflush (093352), Air Sharp™ (093390), MDS 6890™ (0933490 and 0933491), Unitrex (part numbers 0932900 and 0932902).

Column Flow Splitter (MS to FID)

Guard Cartridge Installation Procedure

μ-Flowmeter™ Instructions

ProteCol Flow Splitter Instruction Manual

ODO-II Olfactory Detector Installation & Operating Instructions

Heated Syringe Cleaner Instructions

Column Flow Splitter (MS to FID) - Instruction Manual

Multidimensional Capillary GC System for Agilent Technologies 6890 GC - Installation and Operation Manual

AirSharp Installation Manual

AirSharp Operating Manual

gc-BackFlush System - Instruction Manual

ms NoVent II - Installation and Operating Instructions

ms NoVent I - Installation and Operating Instructions

Pyrojector II - Installation and Operating Manual

MSVT4 Micro Needle On/Off Valves 

MDS2000 Multidimensional Capillary GC System Installation and Operating Instructions

OSS-1 Outlet Splitter System

CHIS Absorption Tubes Packing Instructions

Liquid Nitrogen Cold Trap System CTS-LN (Part Number 093345) Instructions

Capillary Conversion System CCS-4/NC & CCS-05/NC

The Open-Split Capillary Interface (Part Number 113532)

Concentrator/Headspace Injector (CHIS) Installation and operation Instructions (as a kit or when used with control module)

CHIS Tube Conditioning Accessory Instructions

Older style HPLC columns - prior to July 2009

Adaptor Kit for connecting fused silica capillaries to SGE micro needle valves with 1/16" ports

SealTight™ Valves

Solid Sampling Kit for the SGE Pyrojector II

OSS-2 Outlet Splitter System

VSOS Capillary Outlet Splitter

Inlet Splitter (VSIS-2/-3/-5)

Old Style Gas Purifier Instructions

MOV-1 and MOVT-1 On/off Valves & MCV-1 and MCVT-1 Metering Control Valves

How to use Retention Gap Kits RGK-1, and RGK-2

How to assemble your Capillary Washing Reservoir