The high-precision, safe and reliable powder automation you’ve always wantedView full product details
High-throughput, high sensitivity and low carryover: the new infusion automation from Trajan offers you everything you need to bring your lipidomics mass spec workflow to its peak performance.
Move from manual sample infusion to the highest standard of infusion automation. With rapid cleanup between injections and best-in-class software architecture to integrate into your workflow, our infusion automation will elevate your lipidomics experiments.
The most consistent and flexible system available for infusion automation
Fully customizable infusion eliminates carryover concerns while saving you time. Allows for sample infusion at flow rates between 5 and 100 µL/min — directly into your ESI source via the injection valve — precisely and without pulsation. Compatible with both shotgun and targeted lipid analysis.
The powerful Chronos software can execute important operational and integration functions such as reading and reporting to LIMS software, as well as MS acquisition mode switching within a single infusion. The system maintains flow to the source while quickly and thoroughly washing the syringe system for the next infusion.
Exclusive inert configuration is available for your trickiest lipid classes — ensuring your samples never come into contact with any polymers.
“We just ran a whole pile of samples. It ran 24/7 without a hitch. Very reliable.” - Calvin Vary, PhD, Proteomics and Lipidomics Core Facility Maine Medical Center Research Institute, Maine, USA.
Upgrade sample throughput without worrying about carryover
The LEAP PAL injector head is a syringe pump itself, making it the ideal sample delivery system for ESI flow rates, unlike conventional HPLC pumps.
Many lipids are notorious for their adherence to glass and other surfaces resulting in carryover between samples. The special LCMS syringe tool incorporates unique features to minimize this carryover to below 1% for the abundant neutral and phospholipids and even lower for other species.
The illustration below shows how this rapid washing is achieved. After washing the inside, the system will wash the needle externally and be ready to aspirate the next sample.
Figure 1 Sample infusion
Greatest experiment control with powerful, user-friendly software
The infusion process is controlled using our Chronos software, allowing maximum compatibility with your preferred Chromatography Data System, LIMS and MS data systems.
Method parameters are available for flow rates, infusion times, stabilization delays and cleanup conditions, MS acquisition method switching.
With an optional second valve, standard chromatography methods can be used in the same sequence with direct infusion samples.
Figure 2 An example Chronos infusion method
|Flow rate range||5-100 μL/min.|
|Sample formats||Sealed and unsealed vials (1 mL, 2 mL, 10 mL); sealed and unsealed plates (96 and 384-well).|
|Optional features||Sample cooling drawers (4-40°C), inert flow path, second valve for chromatography autosampling|
|Sample capacity||Expandable capacity, from three plate tray holder, to 6 or 12 plate drawer stack(s). Capacity depends on vial/tray formats and drawer configuration, maximum 4 stacks|
|Signal stability||Signal stability on a single sample has been demonstrated for 20 minutes. Long term stability confirmed in successful analysis of 400 samples over a 36 hour period (5 minute injection per sample).|
|Computer requirements (minimum)||Operating system: Windows 7 SP1 (32 or 64 bit), Windows 8.1 or Windows 10. Hardware: Intel Dual Core 2.0 GHz, 60 GB hard disk, 4 GB RAM, dedicated ethernet port or free location on local private network switch with 1 free USB port for security dongle. Monitor: 1366 x 768 (recommended 1440 x 900 or 1920 x 1080).|
The PAL3 System is one of the most widely used and successful sample preparation and handling platforms.
PAL System’s new generation of sample preparation and handling instruments.
The LEAP CHRONECT® Quantos integrated powder-liquid automation system is a complete workflow like no other. This powerful platform is achieved through seamless coordination of industry proven, trusted, modular elements.
The high-precision, safe and reliable powder automation you’ve always wanted.
Integration of accurate dosing and weighing technology into liquid sample preparation maximizes your time and resources while minimizing user exposure and error sources.
The most complete, trusted and flexible system available
The industry-leading Quantos powder dosing capability, from METTLER TOLEDO, enables the highest level of accuracy and safety in powder delivery. The calibrated and certified balance is isolated from the moving components through optimized mass and mechanical damping. The integrated, multi-axis, cooperative robot combined with the precision-engineered platform facilitates the automation of up to 32 different powders.
Synchronized and in parallel, the PAL workstation automatically seals and caps vials, adds accurate liquid volumes, agitates, vortexes, mixes, heats, and or promotes dissolution or extraction from the solid, according to your workflow.
Positive tracking and traceability of powder dosing heads through RFID
Positive tracking and traceability of powder dosing heads is achieved through embedded RFID tracking. This tracking and workflow information can be output directly to LIMS systems, data systems, PDF, Excel or CSV formats.
The powerful Chronos software empowers users with familiar sample/method based control. The Chronos software natively drives all modules in the system, eliminating any need for robot programming in your laboratory. Chronos also expands compatibility to integration with large scale automation systems, all major analytical instrument data systems, and legacy QX96 excel files.
Compact footprint allows you to handle powder samples in a safe, inert gas environment
The integrated system is designed with your lab in mind, and a footprint compatible with benchtop, open laboratory environments and both positive and negative pressure cabinets.
Powder can be added to vials in a completely isolated environment, sealed in inert gas, and prepared for any analytical technique, without users coming into contact with potentially toxic or otherwise hazardous powders.
Sample and dosing
Powder dispensing range: 1 mg - several grams.
Component dosing heads: Up to 32 Quantos standard dosing heads.
Suitable powders: Free-flowing, fluffy, granular or electrostatically charged.
Dispensing time - 1 component: 10 - 60 seconds, depending on compound.
Target vial formats: Sealed and unsealed vials (2 mL, 10 mL, 20 mL); unsealed 1 mL vials.
Dimensions (w x d x h):
- without capping or liquid prep: 950 mm x 650 mm x 825 mm
- with capping and/or liquid prep: 1575 mm x 795 mm x 825 mm
CHRONECT robot: cooperative robot and Quantos platform.
Quantos powder dosing: automated analytical balance and dosing module.
Capping/liquid automation: PAL system and Chronos control software - varies by application.