All
Manual - Instructions for syringe use, care and maintenance 10 µL syringes for Bruker/Varian 8035, 8100 and 8200 autosamplers
Download: Manual - Instructions for syringe use, care and maintenance 10 µL syringes for Bruker/Varian 8035, 8100 and 8200 autosamplers [PDF] View full product details
Part Number List - GC nuts for fittings
Download: Part Number List - GC nuts for fittings [PDF]
Also see: Product Data Sheet - GC nuts for fittings
Find in table:
| Part number | Part description and detail |
|---|---|
| Stainless steel | |
| 103403 | 1/16" hole stainless steel, PK5 |
| 103408 | 1/16" hole (extended) stainless steel, PK5 |
| 1034030 | 1/16" hole male stainless steel nuts, PK5 |
| 103405 | 1/16" fittings x 1.2 mm hole (extended) stainless steel, PK5 |
| 103402 | 1/8" hole stainless steel, PK5 |
| 1034050 | 1/8" hole (extended) stainless steel, PK5 |
| 103407 | 1/4" hole (extended) stainless steel, PK5 |
| 103400 | 1.2 mm hole mini union stainless steel nut, PK5 |
| Brass (nickel plated) | |
| 1034085 | 1/16" x 1.2 mm hole (extended mini) brass (nickel plated), PK2 |
| 103406 | 1/16" x 1.2 mm hole (extended) brass (nickel plated), PK5 |
| 103404 | 1/16" hole brass (nickel plated), PK5 |
| SilTite metal nuts | |
| 073224 | SilTite metal nuts, female thread 10-32 ID hole, PK5 |
| 073226 | SilTite metal nuts for Agilent split/splitless injectors, PK5 |
| 073225 | SilTite metal nuts 10/32" female thread 1/16" ID hole, PK5 |
| 073232 | SilTite metal nuts - slotted female thread M5 for use on Shimadzu GC14A, GC17A, GC2010 and GC2014 detector/injectors, (not for MS interfaces or QP2010 injector), PK5 |
| 073233 | SilTite metal nuts - Shimadzu QP5000/5050 standard MS Interface, PK5 |
| 073230 | SilTite metal nuts for Thermo GCMS interface connections, PK5 |
| 073231 | SilTite metal nuts with 1/4-28 female thread for Varian/Bruker GCMS interface connections, PK5 |
| SilTite FingerTite | |
| 073636 | SilTite FingerTite female nut, PK5 |
Part Number List - Graphite GC ferrules
Download: Part Number List - Graphite GC ferrules [PDF]
Also see: Product Data Sheet - Graphite GC ferrules
Find in table:
| Part number | Part description and detail |
|---|---|
| For use on Agilent and Thermo Scientific TRACE 1300 Series GC injectors and detectors at atmospheric pressure e.g. FID | |
| 072601 | Graphite short ferrule with 1/4" hole for 1/4" fittings, Bruker/Varian 1075 and 1077 injection port liners, unions, and 1/4" OD packed columns, PK10 |
| 072602 | Graphite short ferrule with 1/8" hole for 1/8" fittings, unions, and 1/8" OD packed columns, PK10 |
| 072635 | Graphite short reducing ferrule with 0.5 mm hole for detector/injectors (not for MSD interface connections), PK10 |
| 072636 | Graphite short reducing ferrule with 0.8 mm hole for detector/injectors (not for MSD interface connections), PK10 |
| For use on Bruker/Varian GC injectors and detectors at atmospheric pressure e.g. FID | |
| 072627 | Graphite ferrule with 0.5 mm hole for 1/16" fittings, PK10 |
| 072626 | Graphite ferrule with 0.8 mm hole for 1/16" fittings, PK10 |
| 072622 | Graphite ferrule with 1/8" hole for 1/8" OD packed columns, PK10 |
| 072621 | Graphite ferrule with 1/4" hole for 1/4" OD packed columns, PK10 |
| For use on Shimadzu GC-2014, GC-2010, GC-17A and GC-14A injectors/detectors (not for MS interfaces or QP2010 injector) | |
| 0726080 | Graphite ferrule with 0.5 mm hole for GC14A, GC17A, GC2010 and GC2014 detector/injectors |
| 0726082 | Graphite ferrule with 0.8 mm hole for GC14A, GC17A, GC2010 and GC2014 detector/injectors |
| 0726001 | Graphite sealing ring with 5 mm hole for Shimadzu 14, 15A and 16 (Spl-14 injector) liners and 5 mm OD packed columns, PK10 |
| For use on Thermo Scientific TRACE GC ultra and FOCUS GC injectors and detectors at atmospheric pressure e.g. FID | |
| 072619 | Graphite ferrule with 0.5 mm hole for Carlo Erba detector/injectors |
| 072614 | Graphite ferrule with 0.8 mm hole for Carlo Erba detector/injectors |
| 072622 | Graphite ferrule with 1/8" hole for 1/8" OD packed columns, PK10 |
| 072621 | Graphite ferrule with 1/4" hole for 1/4" OD packed columns, PK10 |
| For use on PerkinElmer injectors and detectors at atmospheric pressure e.g. FID | |
| 072627 | Graphite ferrule with 0.5 mm hole for 1/16" fittings, PK10 |
| 072624 | Graphite ferrules with 0.5 mm hole for use with 1/8" nuts on PerkinElmer injectors and detectors, PK10 |
| 072626 | Graphite ferrule with 0.8 mm hole for 1/16" fittings, PK10 |
| 0726280 | Graphite ferrules with 1.0 mm hole for use with 1/8" nuts on PerkinElmer injectors and detectors, PK10 |
| 072622 | Graphite ferrule with 1/8" hole for 1/8" OD packed columns, PK10 |
| 072621 | Graphite ferrule with 1/4" hole for 1/4" OD packed columns, PK10 |
| Standard ferrule solutions - 1/16" fitting specification | |
| 072603 | Graphite short ferrule with 1/16" hole for 1/16" fittings, unions, PK10 |
| 072606 | Graphite short reducing ferrule with 1.2 mm hole for 1/16" fittings, PK10 |
| 072607 | Graphite short reducing ferrule with 1 mm hole for 1/16" fittings, PK10 |
| 072608 | Graphite short reducing ferrule with 0.8 mm hole for 1/16" fittings, PK10 |
| 072610 | Graphite short reducing ferrule with 0.5 mm hole for 1/16" fittings, PK10 |
| 072623 | Graphite ferrule with 1/16" hole for 1/16" fittings, PK10 |
| 072625 | Graphite ferrule with 1.0 mm hole for 1/16" fittings, PK10 |
| Standard ferrule solutions - 1/8" fitting specification | |
| 0726270 | Graphite ferrule with 0.8 mm hole for 1/8" fittings, PK10 |
| 072628 | Graphite ferrule with 1.2 mm hole for 1/8" fittings, PK10 |
| 0726283 | Graphite ferrule with 1/16" hole for 1/8" fittings, PK10 |
| 072609 | Graphite short reducing ferrule with 1.2 mm hole for 1/8" fittings, PK10 |
| Standard ferrule solutions - 1/4" fitting specification | |
| 072604 | Graphite short reducing ferrule with 6 mm hole for 1/4" fittings, PK10 |
| 0726151 | Graphite short reducing ferrule with 1/8" hole for 1/4" fittings, PK10 |
| 072617 | Graphite short reducing ferrule with 5/16" hole for 1/4" fittings, PK10 |
| 0726212 | Graphite reducing ferrule with 6 mm hole for 1/4" fittings, PK10 |
| 0726281 | Graphite ferrule with 1/8" hole for 1/4" fittings, PK10 |
| 0726282 | Graphite ferrule with 1/16" hole for 1/4" fittings, PK10 |
| Other ferrules | |
| 072629 | Replacement mini union graphite ferrules with 0.8 mm hole, PK10 |
| 072630 | Replacement mini union graphite ferrules with 0.5 mm hole, PK10 |
| 072605 | Graphite short ferrule with 5 mm hole for 5 mm fittings, PK10 |
| 072613 | Graphite short ferrule with 1/2" hole for 1/2" fittings, PK10 |
| 072615 | Graphite short ferrule with 3/8" hole for 3/8" fittings, PK10 |
| 0726217 | Graphite sealing ring for Varian 1078 and 1079 injectors, PK10 |
Part Number List - Graphite/Vespel® GC ferrules
Download: Part Number List - Graphite/Vespel® GC ferrules [PDF]
Also see: Product Data Sheet - Graphite/Vespel® GC ferrules
Find in table:
| Part number | Part description and detail |
|---|---|
| 072671 | 15% Graphite/85% Vespel ferrule with 0.8 mm hole for 1/8" fitting, PK10 |
| 072673 | 15% Graphite/85% Vespel ferrule with 1/8" hole for 1/16" fitting, PK10 |
| 072674 | 15% Graphite/85% Vespel ferrule with 2 x 0.8 mm holes for 1/8" fitting, PK10 |
| 072694 | 15% Graphite/85% Vespel mini union ferrule with no hole, PK10 |
| 072695 | 15% Graphite/85% Vespel mini union ferrule with 0.3 mm hole, PK10 |
| 072696 | 15% Graphite/85% Vespel mini union ferrule with 0.4 mm hole, PK10 |
| 072697 | 15% Graphite/85% Vespel mini union ferrule with 0.5 mm hole, PK10 |
| 072698 | 15% Graphite/85% Vespel mini union ferrule with 0.8 mm hole, PK10 |
| 073105 | 15% Graphite/85% Vespel short ferrule with no hole, for Agilent injectors, PK10 |
| 073107 | 15% Graphite/85% Vespel short ferrule with 0.3 mm hole, for Agilent injectors, PK10 |
| For use on Agilent GC injectors and detectors at atmospheric pressure e.g. FID | |
| 073109 | 15% Graphite/85% Vespel short ferrule with 0.4 mm hole, PK10 |
| 073111 | 15% Graphite/85% Vespel short ferrule with 0.5 mm hole, PK10 |
| 073113 | 15% Graphite/85% Vespel short ferrule with 0.8 mm hole, PK10 |
| 073105 | 15% Graphite/85% Vespel short ferrule with no hole, PK10 |
| 073107 | 15% Graphite/85% Vespel short ferrule with 0.3 mm hole, PK10 |
| For use on Agilent GCMS interface | |
| 072663 | 15% Graphite/85% Vespel ferrule with 0.4 mm hole, PK10 |
| 072654 | 15% Graphite/85% Vespel ferrule with 0.5 mm hole, PK10 |
| 072655 | 15% Graphite/85% Vespel ferrule with 0.8 mm hole, PK10 |
| For use on Bruker/Varian GC injectors and detectors at atmospheric pressure e.g. FID | |
| 072663 | 15% Graphite/85% Vespel ferrule with 0.4 mm hole, PK10 |
| 072654 | 15% Graphite/85% Vespel ferrule with 0.5 mm hole, PK10 |
| 072655 | 15% Graphite/85% Vespel ferrule with 0.8 mm hole, PK10 |
| For use on PerkinElmer GC injectors and detectors at atmospheric pressure e.g. FID | |
| 072663 | 15% Graphite/85% Vespel ferrule with 0.4 mm hole, PK10 |
| 072654 | 15% Graphite/85% Vespel ferrule with 0.5 mm hole, PK10 |
| 072655 | 15% Graphite/85% Vespel ferrule with 0.8 mm hole, PK10 |
| For use on Shimadzu QP5000/5050 standard MS interface | |
| 0726563 | 15% Graphite/85% Vespel ferrule with 0.4 mm hole, PK10 |
| 0726564 | 15% Graphite/85% Vespel ferrule with 0.5 mm hole, PK10 |
| 0726561 | 15% Graphite/85% Vespel ferrule with 0.4 mm hole, PK10 |
| 0726562 | 15% Graphite/85% Vespel ferrule with 0.5 mm hole, PK10 |
| 0726547 | 15% Graphite/85% Vespel ferrule with 0.8 mm hole, PK10 |
| For use on Shimadzu QP5000/5050 wide bore MS interface, QP2010 injector and QP2010 standard MS interface | |
| 072663 | 15% Graphite/85% Vespel ferrule with 0.4 mm hole, PK10 |
| 072654 | 15% Graphite/85% Vespel ferrule with 0.5 mm hole, PK10 |
| 072655 | 15% Graphite/85% Vespel ferrule with 0.8 mm hole, PK10 |
| For use on Shimadzu QP5000/5050 wide bore MS interface, QP2010 injector and QP2010 standard MS interface | |
| 072663 | 15% Graphite/85% Vespel ferrule with 0.4 mm hole, PK10 |
| 0726703 | 15% Graphite/85% Vespel ferrule with 0.4 mm hole for 1/8" fitting, PK10 |
| 072654 | 15% Graphite/85% Vespel ferrule with 0.5 mm hole, PK10 |
| 0726702 | 15% Graphite/85% Vespel ferrule with 0.5 mm hole for 1/8" fitting, PK10 |
| 072655 | 15% Graphite/85% Vespel ferrule with 0.8 mm hole, PK10 |
| 072671 | 15% Graphite/85% Vespel ferrule with 0.8 mm hole for 1/8" fitting, PK10 |
| For use on Thermo Scientific TRACE 1300 Series GC at atmospheric pressure e.g. FID | |
| 073109 | 15% Graphite/85% Vespel short ferrule with 0.4 mm hole, PK10 |
| 073111 | 15% Graphite/85% Vespel short ferrule with 0.5 mm hole, PK10 |
| 073113 | 15% Graphite/85% Vespel short ferrule with 0.8 mm hole, PK10 |
| 073105 | 15% Graphite/85% Vespel short ferrule with no hole, PK10 |
| 073107 | 15% Graphite/85% Vespel short ferrule with 0.3 mm hole, PK10 |
| For use on Thermo Scientific GCMS interface | |
| 072663 | 15% Graphite/85% Vespel ferrule with 0.4 mm hole, PK10 |
| 072654 | 15% Graphite/85% Vespel ferrule with 0.5 mm hole, PK10 |
| 072655 | 15% Graphite/85% Vespel ferrule with 0.8 mm hole, PK10 |
| Standard ferrule solutions - 1/16" fitting specification | |
| 0726591 | 15% Graphite/85% Vespel Vg/Micromass ferrule with 0.3/0.4 mm hole for 1/16" fitting, PK10 |
| 0726632 | 15% Graphite/85% Vespel ferrule with 0.2 mm hole for 1/16" fitting, PK10 |
| 0726640 | 15% Graphite/85% Vespel ferrule with 1 x 0.5 mm hole and 1 x 0.3 mm hole for 1/16" fitting, PK10 |
| 0726641 | 15% Graphite/85% Vespel ferrule with 1 x 0.4 mm hole and 1 x 0.3 mm hole for 1/16" fitting, PK10 |
| 0726642 | 15% Graphite/85% Vespel ferrule with 1 x 0.5 mm hole and 1 x 0.4 mm hole for 1/16" fitting, PK10 |
| 0726650 | 15% Graphite/85% Vespel ferrule with 3 x 0.3 mm holes for 1/16" fitting, PK10 |
| 072673 | 15% Graphite/85% Vespel ferrule with 1/8" hole for 1/16" fitting, PK10 |
| Standard ferrule solutions - 1/8" fitting specification | |
| 072674 | 15% Graphite/85% Vespel ferrule with 2 x 0.8 mm holes for 1/8" fitting, PK10 |
| 0726700 | 15% Graphite/85% Vespel ferrule with 2.4 mm hole for 1/8" fitting, PK10 |
| 0726701 | 15% Graphite/85% Vespel ferrule with 1/16" hole for 1/8" fitting, PK10 |
| Standard ferrule solutions - 1/4" fitting specification | |
| 0726660 | 15% Graphite/85% Vespel ferrule with 0.5 mm hole for 1/4" fitting, PK10 |
| 0726673 | 15% Graphite/85% Vespel ferrule with 6 mm hole for 1/4" fitting, PK10 |
| 0726700 | 15% Graphite/85% Vespel ferrule with 2.4 mm hole for 1/8" fitting, PK10 |
| 0726701 | 15% Graphite/85% Vespel ferrule with 1/16" hole for 1/8" fitting, PK10 |
| 0726702 | 15% Graphite/85% Vespel ferrule with 0.5 mm hole for 1/8" fitting, PK10 |
| 0726703 | 15% Graphite/85% Vespel ferrule with 0.4 mm hole for 1/8" fitting, PK10 |
| 072629 | Replacement mini union graphite ferrules with 0.8 mm hole, PK10 |
| 072630 | Replacement mini union graphite ferrules with 0.5 mm hole, PK10 |
| 072635 | Graphite short reducing ferrule with 0.5 mm hole for detector/injectors (not for MSD interface connections), PK10 |
| 072636 | Graphite short reducing ferrule with 0.8 mm hole for detector/injectors (not for MSD interface connections), PK10 |
Part Number List - SGE ConnecTite inlet liners
Download: Part Number list - SGE ConnecTite inlet liners [PDF]
Also see: Product Data Sheet - SGE ConnecTite inlet liners
Find in table:
| Part number | Part description and detail |
|---|---|
| Agilent and Thermo Scientific TRACE 1300 series GC | |
| 092324 | ConnecTite inlet liners length 78.5 mm PK5 |
| 092325 | ConnecTite inlet liners with top hole, length 78.5 mm PK5 |
| 092326 | ConnecTite inlet liners with bottom hole, length 78.5 mm PK5 |
| Bruker/Varian | |
| 09203001 | ConnecTite Bruker/Varian 1093/1094 inlet liner 0.8 mm ID, length 54 mm (rest 0.25 mm) PK1 |
| 092030 | ConnecTite Bruker/Varian 1093/1094 inlet liners 0.8 mm ID, length 54 mm (rest 0.25 mm) PK5 |
| 09203401 | ConnecTite Bruker/Varian 1093/1094 inlet liner 0.8 mm ID, length 54 mm (rest 0.5 mm) PK1 |
| 092034 | ConnecTite Bruker/Varian 1093/1094 inlet liners 0.8 mm ID, length 54 mm (rest 0.5 mm) PK5 |
| Shimadzu | |
| 092329 | ConnecTite Shimadzu inlet liners length 95 mm PK5 |
| 092330 | ConnecTite Shimadzu inlet liners with top hole, length 95 mm PK5 |
| 092331 | ConnecTite Shimadzu inlet liners with bottom hole, length 95 mm PK5 |
| Thermo Scientific TRACE GC Ultra and FOCUS GC | |
| 092334 | ConnecTite Thermo Scientific inlet liners length 105 mm PK5 |
| 092336 | ConnecTite Thermo Scientific inlet liners with bottom hole, length 105 mm PK5 |
Part Number List - SGE double taper inlet liners
Download: Part Number List - SGE double taper inlet liners [PDF]
Also see: Product Data Sheet - SGE double taper inlet liners
Find in table:
| Part number | Part description and detail |
|---|---|
| Agilent and Thermo Scientific TRACE 1300 series GC | |
| 09201801 | Inlet liner 4 mm ID double taper, Length 78.5 mm PK1 |
| 092018 | Inlet liners 4 mm ID double taper, length 78.5 mm PK5 |
| 092230 | Inlet liners 4 mm ID double taper, length 78.5 mm PK25 |
Part Number List - SGE FocusLiner® inlet liners
Download: Part Number List - SGE FocusLiner® inlet liners [PDF]
Also see: Product Data Sheet - SGE FocusLiner® inlet liners
Find in table:
| Part number | Part description and detail |
|---|---|
| Agilent and Thermo Scientific TRACE 1300 series GC | |
| 09200501 | Inlet Liner 2.3 mm ID FocusLiner, length 78.5 mm PK1 |
| 092005 | Inlet Liners 2.3 mm ID FocusLiner, length 78.5 mm PK5 |
| 092008 | Inlet Liners 2.3 mm ID FocusLiner, length 78.5 mm PK25 |
| 09200201 | Inlet Liner 4 mm ID FocusLiner, length 78.5 mm PK1 |
| 092002 | Inlet Liners 4 mm ID FocusLiner, length 78.5 mm PK5 |
| 092219 | Inlet Liners 4 mm ID FocusLiner, length 78.5 mm PK25 |
| ATAS | |
| 09227201 | ATAS inlet liner FocusLiner, length 81 mm PK1 |
| 092272 | ATAS inlet liners FocusLiner, length 81 mm PK5 |
| Bruker/Varian | |
| 092022 | Bruker/Varian 1075/1077 inlet liners 4 mm ID FocusLiner, length 72 mm PK5 |
| 092028 | Bruker/Varian 1075/1077 inlet liners 4 mm ID FocusLiner (top-end rest), length 72 mm PK5 |
| 09203701 | Bruker/Varian 1078/1079 inlet liner 3.4 mm ID FocusLiner, length 54 mm PK1 |
| 092037 | Bruker/Varian 1078/1079 inlet liners 3.4 mm ID FocusLiner, length 54 mm PK5 |
| 09203725 | Bruker/Varian 1078/1079 inlet liners 3.4 mm ID FocusLiner, length 54 mm PK25 |
| PerkinElmer | |
| 09210101 | PerkinElmer inlet liner 2 mm ID FocusLiner, length 86.2 mm PK1 |
| 092101 | PerkinElmer inlet liners 2 mm ID FocusLiner, length 86.2 mm PK5 |
| 092092 | PerkinElmer inlet liners 4 mm ID FocusLiner, length 92 mm PK5 |
| 09209225 | PerkinElmer inlet liners 4 mm ID FocusLiner, length 92 mm PK25 |
| Shimadzu | |
| 09206201 | Shimadzu 2010/17A inlet liner 3.4 mm ID FocusLiner, length 95 mm PK1 |
| 092062 | Shimadzu 2010/17A inlet liners 3.4 mm ID FocusLiner, length 95 mm PK5 |
| 09206225 | Shimadzu 2010/17A inlet liners 3.4 mm ID FocusLiner, length 95 mm PK25 |
| 09205901 | Shimadzu 2010/17A inlet liner 3.4 mm ID FocusLiner, length 95 mm PK1* |
| 092059 | Shimadzu 2010/17A inlet liners 3.4 mm ID FocusLiner, length 95 mm PK5* |
| 09205925 | Shimadzu 2010/17A inlet liners 3.4 mm ID FocusLiner, length 95 mm PK25* |
| 09206501 | Shimadzu 14 inlet liner 3.4 mm ID FocusLiner, length 99 mm PK1 |
| 092065 | Shimadzu 14 inlet liners 3.4 mm ID FocusLiner, length 99 mm PK5 |
| Thermo Scientific TRACE GC Ultra and FOCUS GC | |
| 09204625 | Thermo Scientific inlet liners 5 mm ID FocusLiner, length 105 mm PK25 |
| 092048 | Thermo Scientific inlet liners (for 50 mm needle) 5 mm ID FocusLiner, length 105 mm PK5 |
| 092049 | Thermo Scientific inlet liners (for 50 mm needle) 5 mm ID FocusLiner (top-end rest), length 105 mm PK5 |
| 09204501 | Thermo Scientific inlet liner (for 70 mm needle) 5 mm ID FocusLiner, length 105 mm PK1 |
| 092045 | Thermo Scientific inlet liners (for 70 mm needle) 5 mm ID FocusLiner, length 105 mm PK5 |
| 092046 | Thermo Scientific inlet liners (for 70 mm needle) 5 mm ID FocusLiner (top-end rest), length 105 mm PK5 |
* When using a standard 42 mm needle for autosamplers, the sample will be injected on top of the wool for this liner.
View full product details
Part Number List - SGE PTV/LVI inlet liners
Download: Part Number List - SGE PTV/LVI inlet liners [PDF]
Also see: Product Data Sheet - SGE PTV/LVI inlet liners
Find in table:
| Part number | Part description and detail |
|---|---|
| Agilent | |
| 092210 | Agilent AC inlet liners PTV untreated, length 73 mm PK5 |
| 092211 | Agilent AC inlet liners PTV untreated, length 73 mm PK25 |
| Agilent/Gerstel | |
| 092243 | Agilent Gerstel CIS 4 inlet liners LVI, length 71 mm PK5 |
| Bruker/Varian | |
| 092245 | Bruker/Varian 1078/1079 inlet liners LVI, length 54 mm PK5 |
| 09224525 | Bruker/Varian 1078/1079 inlet liners LVI, length 54 mm PK25 |
| PerkinElmer | |
| 092097 | PerkinElmer inlet liners PTV gooseneck 1 mm ID, length 88 mm PK5 |
| PerkinElmer PSS | |
| 092244 | PerkinElmer PSS inlet liners PTV, length 86.2 mm PK5 |
| Shimadzu | |
| 092042501 | Shimadzu inlet liner PTV 3 baffle, length 95 mm PK1 |
| 0920425 | Shimadzu inlet liners PTV 3 baffle, length 95 mm PK5 |
| 09229201 | Shimadzu 2010 inlet liner LVI straight non-sintered with wool, length 95 mm PK1 |
| 092292 | Shimadzu 2010 inlet liners LVI straight non-sintered with wool, length 95 mm PK5 |
| Thermo Scientific TRACE 1300 Series GC, TRACE GC Ultra and FOCUS GC | |
| 092155 | Thermo Scientific inlet liners LVI, length 120 mm PK5 |
| 09215525 | Thermo Scientific inlet liners LVI, length 120 mm PK25 |
Note - Bruker/Varian 1077 injectors use 78.5 mm “Agilent” liners
View full product details
Part Number List - SGE straight inlet liners
Download: Part Number List - SGE straight inlet liners [PDF]
Also see: Product Data Sheet - SGE straight inlet liners
Find in table:
| Part number | Part description and detail |
|---|---|
| Agilent, Bruker/Varian 1077 and Thermo Scientific TRACE 1300 series | |
| 09201601 | Inlet liner 1.2 mm ID straight, length 78.5 mm PK1 |
| 092016 | Inlet liners 1.2 mm ID straight, length 78.5 mm PK5 |
| 092224 | Inlet liners 1.2 mm ID straight, length 78.5 mm PK25 |
| 09200401 | Inlet liner, quartz, 2 mm ID straight, length 78.5 mm PK1 |
| 092004 | Inlet liners, quartz, 2 mm ID straight, length 78.5 mm PK5 |
| 09200701 | Inlet liner 4 mm ID straight, length 78.5 mm PK1 |
| 092007 | Inlet liners 4 mm ID straight, length 78.5 mm PK5 |
| 092222 | Inlet liners 4 mm ID straight, length 78.5 mm PK25 |
| 09200101 | Inlet liner with quartz wool 4 mm ID, length 78.5 mm PK1 |
| 092001 | Inlet liners with quartz wool 4 mm ID, length 78.5 mm PK5 |
| 092220 | Inlet liners with quartz wool 4 mm ID, length 78.5 mm PK25 |
| Agilent | |
| 09224601 | Agilent PTV inlet liner, single baffle straight, length 71 mm PK1 |
| 092246 | Agilent PTV inlet liners, single baffle straight, length 71 mm PK5 |
| 09223401 | Agilent inlet liner packed column, length 92 mm PK1 |
| 092234 | Agilent inlet liners packed column, length 92 mm PK5 |
| 092235 | Agilent inlet liners packed column, length 92 mm PK25 |
| Bruker/Varian | |
| 092031 | Bruker/Varian 1078/1079 inlet liners 0.5 mm ID straight, length 54 mm PK5 |
| 092117 | Bruker/Varian 1078/1079 inlet liners SPME 0.75 mm ID, length 54 mm PK5 |
| 092027 | Bruker/Varian 1093/1094 inlet liners 0.5 mm ID, length 54 mm PK5 |
| 092030 | Bruker/Varian 1093/1094 inlet liners 0.8 mm ID (rest 0.25 mm), length 54 mm PK5 |
| 092034 | Bruker/Varian 1093/1094 inlet liners 0.8 mm ID (rest 0.50 mm), length 54 mm PK5 |
| Dani | |
| 092500 | Dani inlet liners with quartz wool 4 mm ID, length 70 mm PK5 |
| 092501 | Dani inlet liners 4 mm ID straight, length 70 mm PK5 |
| PerkinElmer | |
| 092098 | PerkinElmer PSS inlet liners 2 mm ID, length 86.2 mm PK5 |
| 09210301 | PerkinElmer inlet liner 2 mm ID straight, length 92 mm PK1 |
| 092103 | PerkinElmer inlet liners 2 mm ID straight, length 92 mm PK5 |
| 09210001 | PerkinElmer inlet liner 4 mm ID straight, length 92 mm PK1 |
| 092100 | PerkinElmer inlet liners 4 mm ID straight, length 92 mm PK5 |
| 09210025 | PerkinElmer inlet liners 4 mm ID straight, length 92 mm PK25 |
| 092236 | PerkinElmer inlet liners packed column, length 112 mm PK5 |
| Shimadzu | |
| 09208401 | Shimadzu 9A/16A inlet liner 3.4 mm ID, length 139 mm PK1 |
| 092084 | Shimadzu 9A/16A inlet liners 3.4 mm ID, length 139 mm PK5 |
| 09208901 | Shimadzu 2010/17A inlet liner 0.75 mm ID, length 95 mm PK1 |
| 092089 | Shimadzu 2010/17A inlet liners 0.75 mm ID, length 95 mm PK5 |
| 092086101 | Shimadzu 2010/17A inlet liner 2.6 mm ID, length 95 mm PK1 |
| 0920861 | Shimadzu 2010/17A inlet liners 2.6 mm ID, length 95 mm PK5 |
| 09206401 | Shimadzu 2010/17A inlet liner 3.4 mm ID, length 95 mm PK1 |
| 092064 | Shimadzu 2010/17A inlet liners 3.4 mm ID, length 95 mm PK5 |
| 09229201 | Shimadzu 2010/17A inlet liner non-sintered LVI with wool straight, length 95 mm PK1 |
| Thermo Scientific TRACE GC Ultra and FOCUS GC | |
| 09214801 | Thermo Scientific inlet liner 0.8 mm ID straight, length 105 mm PK1 |
| 092148 | Thermo Scientific inlet liners 0.8 mm ID straight, length 105 mm PK5 |
| 092147 | Thermo Scientific inlet liners 3 mm ID, length 105 mm PK5 |
| 09215001 | Thermo Scientific inlet liner 5 mm ID straight, length 105 mm PK1 |
| 092150 | Thermo Scientific inlet liners 5 mm ID straight, length 105 mm PK5 |
| 092142 | Thermo Scientific TRACE inlet liners 2 mm ID, length 120 mm PK5 |
Part Number List - SGE tapered FocusLiner® inlet liners
Download: Part Number List - SGE tapered FocusLiner® inlet liners [PDF]
Also see: Product Data Sheet - SGE tapered FocusLiner® inlet liners
Find in table:
| Part number | Part description and detail |
|---|---|
| Agilent and Thermo Scientific TRACE 1300 GC | |
| 09200301 | Inlet Liner 4 mm ID tapered FocusLiner, length 78.5 mm PK1 |
| 092003 | Inlet Liners 4 mm ID tapered FocusLiner, length 78.5 mm PK5 |
| 092011 | Inlet Liners 4 mm ID tapered FocusLiner, length 78.5 mm PK25 |
| 09211101 | Inlet Liner 2.3 mm ID tapered FocusLiner, length 78.5 mm PK1 |
| 092111 | Inlet Liners 2.3 mm ID tapered FocusLiner, length 78.5 mm PK5 |
| 092115 | Inlet Liners 2.3 mm ID tapered FocusLiner, length 78.5 mm PK25 |
| Bruker/Varian | |
| 092036 | Bruker/Varian 1075/1077 inlet liners 3.4 mm ID tapered FocusLiner, length 54 mm PK5 |
| 09202501 | Bruker/Varian 1075/1077 inlet liner 4 mm ID tapered FocusLiner, length 72 mm PK1 |
| Dani | |
| 092506 | Dani inlet liners 4 mm ID tapered FocusLiner, length 70 mm PK5 |
| PerkinElmer | |
| 09209501 | PerkinElmer inlet liner 4 mm ID tapered FocusLiner, length 92 mm PK1 |
| 092095 | PerkinElmer inlet liners 4 mm ID tapered FocusLiner, length 92 mm PK5 |
| 09209525 | PerkinElmer inlet liners 4 mm ID tapered FocusLiner, length 92 mm PK25 |
| Shimadzu | |
| 09206801 | Shimadzu 2010/17A inlet liner 3.4 mm ID tapered FocusLiner, length 95 mm PK1 |
| 092068 | Shimadzu 2010/17A inlet liners 3.4 mm ID tapered FocusLiner, length 95 mm PK5 |
| 09206825 | Shimadzu 2010/17A inlet liners 3.4 mm ID tapered FocusLiner, length 95 mm PK25 |
| 09205801 | Shimadzu 2010/17A inlet liner 3.4 mm ID tapered FocusLiner, length 95 mm PK1 |
| 092058 | Shimadzu 2010/17A inlet liners 3.4 mm ID tapered FocusLiner, length 95 mm PK5 |
| 09205825 | Shimadzu 2010/17A inlet liners 3.4 mm ID tapered FocusLiner, length 95 mm PK25 |
| 092066 | Shimadzu 14A inlet liners 3.4 mm ID tapered FocusLiner, length 99 mm PK5 |
Part Number List - SGE tapered/gooseneck inlet liners
Download: Part Number List - SGE tapered/gooseneck inlet liners [PDF]
Also see: Product Data Sheet - SGE tapered/gooseneck inlet liners
Find in table:
| Part number | Part description and detail |
|---|---|
| Agilent and Thermo Scientific TRACE 1300 GC | |
| 092013 | Inlet Liners gooseneck 2 mm ID, length 78.5 mm PK5 |
| 09201001 | Inlet Liner gooseneck with quartz wool 4 mm ID, length 78.5 mm PK1 |
| 092010 | Inlet Liners gooseneck with quartz wool 4 mm ID, length 78.5 mm PK5 |
| 092223 | Inlet Liners gooseneck with quartz wool 4 mm ID, length 78.5 mm PK25 |
| 09201701 | Inlet Liner tapered 4 mm ID, length 78.5 mm PK1 |
| 092017 | Inlet Liners tapered 4 mm ID, length 78.5 mm PK5 |
| 092229 | Inlet Liners tapered 4 mm ID, length 78.5 mm PK25 |
| 09201901 | Inlet Liner tapered with quartz wool 4 mm ID, length 78.5 mm PK1 |
| 092019 | Inlet Liners tapered with quartz wool 4 mm ID, length 78.5 mm PK5 |
| 092218 | Inlet Liners tapered with quartz wool 4 mm ID, length 78.5 mm PK25 |
| 0926201901 | Inlet Liner tapered with quartz wool pre-fitted o-ring and TI deactivation 4 mm ID, length 78.5 mm PK1 |
| 09262019 | Inlet Liners tapered with quartz wool pre-fitted o-ring and TI deactivation 4 mm ID, length 78.5 mm PK5 |
| Bruker/Varian | |
| 092024 | Bruker/Varian 1075/1077 inlet liners restricted 2 mm ID, length 74 mm PK5 |
| 092228 | Bruker/Varian 1075/1077 inlet liners restricted 2 mm ID, length 74 mm PK25 |
| 09202101 | Bruker/Varian 1075/1077 inlet liner restricted with quartz wool 4 mm ID, length 72 mm PK1 |
| 092021 | Bruker/Varian 1075/1077 inlet liners restricted with quartz wool 4 mm ID, length 72 mm PK5 |
| 09203801 | Bruker/Varian 1078/1079 inlet liner tapered 3.4 mm ID, length 54 mm PK1 |
| 092038 | Bruker/Varian 1078/1079 inlet liners tapered 3.4 mm ID, length 54 mm PK5 |
| 09203825 | Bruker/Varian 1078/1079 inlet liners tapered 3.4 mm ID, length 54 mm PK25 |
| 09203901 | Bruker/Varian 1078/1079 inlet liner tapered 2 mm ID, length 54 mm PK1 |
| 092039 | Bruker/Varian 1078/1079 inlet liners tapered 2 mm ID, length 54 mm PK5 |
| Dani | |
| 092504 | Dani inlet liners tapered 4 mm ID, length 70 mm PK5 |
| Optic | |
| 09227301 | Optic inlet liner with frit 3 mm ID, length 81 mm PK1 |
| 092273 | Optic inlet liners with frit 3 mm ID, length 81 mm PK5 |
| PerkinElmer | |
| 09209701 | PerkinElmer inlet liner PTV gooseneck 1 mm ID, length 88 mm PK1 |
| 092097 | PerkinElmer inlet liners PTV gooseneck 1 mm ID, length 88 mm PK5 |
| 092091 | PerkinElmer inlet liners gooseneck 3 mm ID, length 100 mm PK5 (for 5000 and Sigma Series) |
| 0920990 | PerkinElmer inlet liners tapered 4 mm ID, length 92 mm PK5 |
| Shimadzu | |
| 09208701 | Shimadzu 2010/17A inlet liner tapered 2.6 mm ID, length 95 mm PK1 |
| 092087 | Shimadzu 2010/17A inlet liners tapered 2.6 mm ID, length 95 mm PK5 |
| 09208501 | Shimadzu 2010/17A inlet liner gooseneck 3.4 mm ID, length 95 mm PK1 |
| 092085 | Shimadzu 2010/17A inlet liners gooseneck 3.4 mm ID, length 95 mm PK5 |
| 09208525 | Shimadzu 2010/17A inlet liners gooseneck 3.4 mm ID, length 95 mm PK25 |
| 09206101 | Shimadzu 2010/17A inlet liner gooseneck with quartz wool 3.4 mm ID, length 95 mm PK1 |
| 092061 | Shimadzu 2010/17A inlet liners gooseneck with quartz wool 3.4 mm ID, length 95 mm PK5 |
| 09207101 | Shimadzu 2010/17A inlet liner tapered 3.4 mm ID, length 95 mm PK1 |
| 092071 | Shimadzu 2010/17A inlet liners tapered 3.4 mm ID, length 95 mm PK5 |
| 092077 | Shimadzu 2010/17A inlet liners gooseneck 3.4 mm ID, length 95 mm PK5 |
| 0920831 | Shimadzu 14 inlet liners tapered 3.4 mm ID, length 99 mm PK5 |
| 092083125 | Shimadzu 14 inlet liners tapered 3.4 mm ID, length 99 mm PK25 |
| 092082 | Shimadzu 14 inlet liners mid-gooseneck 3.4 mm ID, length 99 mm PK5 |
| Thermo Scientific TRACE GC Ultra and FOCUS GC | |
| 09214125 | Thermo Scientific inlet liners tapered 3 mm ID, length 105 mm PK25 |
| 09214401 | Thermo Scientific inlet liner tapered 5 mm ID, length 105 mm PK1 |
| 092144 | Thermo Scientific inlet liners tapered 5 mm ID, length 105 mm PK5 |
| 09214425 | Thermo Scientific inlet liners tapered 5 mm ID, length 105 mm PK25 |
Part Number List - SilTite FingerTite® GC ferrules
Download: Part Number List - SilTite FingerTite® GC ferrules [PDF]
Also see: Product Data Sheet - SilTite FingerTite® GC ferrules
Find in table:
| Part number | Part description and detail |
|---|---|
| 073630 | SilTite FingerTite ferrule 0.4 mm hole |
| 073631 | SilTite FingerTite ferrule 0.5 mm hole |
| 073632 | SilTite FingerTite ferrule 0.7 mm hole |
| 073633 | SilTite FingerTite blanking ferrule |
| 073636 | SilTite FingerTite female nut |
| 073625 | SilTite FingerTite generic starter kit |
| 0736100 | SilTite FingerTite starter kit (5 x female nuts, 10 x 0.4 mm hole ferrules, 1 x measuring tool) |
| 0736105 | SilTite FingerTite starter kit (5 x female nuts, 10 x 0.5 mm hole ferrules, 1 x measuring tool) |
| Agilent | |
| 073610 | SilTite FingerTite Agilent INJ/FID starter kit |
| 073611 | SilTite FingerTite Agilent capillary/FID starter kit |
| 073612 | SilTite FingerTite Agilent INJ/MS starter kit |
| 07361053 | SilTite FingerTite Agilent INJ/FID starter kit for use with 0.53 mm ID columns |
| 07361054 | SilTite FingerTite Agilent injector starter kit for use with 0.53 mm ID columns (10 x 0.7 mm ferrules) |
| 0736101 | SilTite FingerTite Agilent capillary adaptor |
| 0736102 | SilTite FingerTite Agilent MS adaptor |
| 0736103 | SilTite FingerTite Agilent FID adaptor (includes 2 graphite Vespel FID ferrules) |
| 0736104 | SilTite FingerTite Agilent injector adaptor (includes 2 base Seals) also suits Thermo 1300 injector |
| 073640 | SilTite FingerTite Agilent MS adaptor |
| ATAS | |
| 073651 | SilTite FingerTite ATAS OPTIC INJ starter kit |
| Bruker/Varian | |
| 073618 | SilTite FingerTite Bruker/Varian INJ/FID starter kit |
| 073619 | SilTite FingerTite Bruker/Varian INJ/MS starter kit (not for 220, 1200, 2000, or 4000 MS systems) |
| Shimadzu | |
| 073628 | SilTite FingerTite Shimadzu 17A INJ/FID starter kit |
| 073629 | SilTite FingerTite Shimadzu 17A INJ/MS starter kit |
| 073620 | SilTite FingerTite Shimadzu 2010 INJ/FID starter kit |
| 07362053 | SilTite FingerTite Shimadzu 2010 INJ/FID starter kit for use with 0.53 mm ID columns |
| 073621 | SilTite FingerTite Shimadzu 2010 INJ/MS starter kit |
| Thermo Scientific | |
| 073614 | SilTite FingerTite Thermo INJ (not for 1300 injector)/FID starter kit |
| 073615 | SilTite FingerTite Thermo INJ (not for 1300 injector)/ISQ starter kit |
| 073616 | SilTite FingerTite Thermo INJ (not for 1300 injector)/DSQ/DSQII starter kit |
| PerkinElmer | |
| 073622 | SilTite FingerTite PerkinElmer INJ/FID starter kit |
| 073623 | SilTite FingerTite PerkinElmer INJ/MS starter kit |
SGE ConnecTite Inlet Liners
$238.40
Spot the Difference in the SGE Lineup!
The SGE inlet liner range aims to make it simple for all gas chromatographers to select the correct liner.
Choosing the right inlet liner and injection parameters can increase peak areas and reduce detection limits by up to 300%.
- Easy to choose - color coded by geometry to simplify your selection.
- Easy to use - contains o-rings so you’re ready to
- Confidence in your analysis - certified deactivation.
Features and benefits
Robust and durable for longer life, less maintenance downtime and reduced maintenance costs.
- ConnecTite liners facilitate maximum transfer of sample to the GC column and inhibit sample degradation by reducing contact with hot metal components inside the inlet.
- A hole in the liner body maintains gas flows in systems equipped with electronic pressure
- ConnecTite liners with a hole near the bottom are ideal for analyses where early eluting compounds may be affected by a tailing solvent
- ConnecTite liners with a hole at the top improve analyses of aqueous samples.
- ConnecTite liners with a hole at the top are also ideal for analyses where compounds of interest elute away from the solvent
Recommended applications
ConnecTite liners are recommended for the following sample or injection modes:
- Trace level
- Direct
- Active compounds.
- Aqueous samples.
Product specifications
ConnecTite available for Agilent, PerkinElmer, Shimadzu 2010, Thermo Scientific, and Bruker/Varian 1075/1077 injectors.
|
Injector |
Length (mm) |
OD (mm) |
ID (mm) |
|
Agilent |
78.5 |
6.3 |
4 |
|
Bruker/Varian |
54 |
4.6 |
0.5 |
|
Bruker/Varian |
54 |
4.6 |
0.8 |
|
Bruker/Varian |
72 |
6.3 |
4 |
|
PerkinElmer |
92 |
6.2 |
4 |
|
Shimadzu |
95 |
5 |
2.6 |
|
Shimadzu |
95 |
5 |
3.4 |
|
Thermo |
105 |
8 |
5 |
|
Thermo |
78.5 |
6.3 |
4 |
More
Please refer to the part number list for more items.
- Product Data Sheet - SGE ConnecTite Inlet Liner [PDF]
- Part Number List - SGE ConnecTite Inlet Liner [PDF]
SGE FocusLiner inlet liners
$91.50
Spot the difference in the SGE lineup!
The SGE inlet liner range aims to make it simple for all gas chromatographers to select the correct liner. Choosing the right inlet liner and injection parameters can increase peak areas and reduce detection limits by up to 300%.
- Easy to choose - color coded by geometry to simplify your selection.
- Easy to use - contains o-rings so you're ready to go.
- Confidence in your analysis - certified deactivation.
Features and benefits
The SGE FocusLiner® uses a unique design to hold the quartz wool in the correct position.
- Two focus points in the liner ensures quartz wool remains in the optimum location.
- The wiping of the needle by the quartz wool prevents droplet formation ensuring excellent reproducibility.
- The presence of the quartz wool improves vaporization minimizing high molecular weight discrimination.
- Color coded blue.
Recommended applications
The FocusLiner is recommended for the following sample or injection modes:
- General purpose.
- Concentrated samples.
- Dirty samples.
- Split/Splitless injection mode.
Product specifications
FocusLiner available for Agilent, PerkinElmer, Shimadzu, Thermo Scientific, and Bruker/Varian injectors.
|
Injector |
Length (mm) |
OD (mm) |
ID (mm) |
|
Agilent |
78.5 |
6.3 |
4 |
|
Agilent |
78.5 |
6.3 |
2.3 |
|
Bruker/Varian |
78.5 |
6.3 |
4 |
|
Bruker/Varian |
78.5 |
6.3 |
2.3 |
|
Bruker/Varian |
74 |
6.3 |
4 |
|
Bruker/Varian |
72 |
6.3 |
4 |
|
Bruker/Varian |
72 |
6.3 |
2.3 |
|
Bruker/Varian |
54 |
5 |
3.4 |
|
PerkinElmer |
92 |
6.2 |
4 |
|
PerkinElmer |
82.2 |
4 |
2 |
|
Shimadzu |
99 |
5 |
3.4 |
|
Shimadzu |
95 |
5 |
3.4 |
|
Thermo |
105 |
8 |
5 |
|
Thermo |
78.5 |
6.3 |
4 |
|
Thermo |
78.5 |
6.3 |
2.3 |
More
Please refer to the part number list for more items.
- Product Data Sheet - SGE FocusLiner inlet liners [PDF]
- Part Number List - SGE FocusLiner inlet liners [PDF]
SGE PTV/LVI Inlet Liners
$243.60
Spot the Difference in the SGE Lineup!
The SGE inlet liner range aims to make it simple for all gas chromatographers to select the correct liner. Choosing the right inlet liner and injection parameters can increase peak areas and reduce detection limits by up to 300%.
- Easy to choose - color coded by geometry to simplify your selection.
- Easy to use - contains o-rings so you're ready to go.
- Confidence in your analysis - certified deactivation.
Features and benefits
- PTV and LVI liners generally have sintered glass beads or powder to increase the surface area and trap nonvolatile residue.
- PTV liners use baffles or a wisp of quartz wool to aid in vaporization of samples and retain droplets during low temperature injections.
- Side hole needles are recommended for these techniques to ensure effective distribution of sample within the liner.
Recommended applications
PTV/LVI liners are recommended for the following sample or injection modes:
- Trace level analyses.
- PTV/LVI.
- Large volume injections.
Product specifications
PTV/LVI liners available for Agilent/Gerstel, PerkinElmer, Shimadzu 2010 injector, Thermo Scientific, and Varian/Bruker 1078/1079 injectors.
|
Injector |
Length (mm) |
OD (mm) |
ID (mm) |
|
Agilent/Gerstel |
71 |
3 |
1.8 |
|
PerkinElmer |
86.2 |
4 |
2 |
|
Shimadzu |
95 |
3.1 |
1.5 |
|
Thermo |
120 |
2.75 |
1.75 |
|
Thermo |
120 |
2.75 |
0.78/1.8 |
|
Varian/Bruker |
54 |
5 |
1.8/3.4 |
More
Please refer to the part number list for more items.
- Product Data Sheet - SGE PTV/LVI Inlet LinersI [PDF]
- Part Number List - SGE PTV/LVI Inlet Liners [PDF]
SGE Straight Inlet Liners
$78.10
Spot the Difference in the SGE Lineup!
The SGE inlet liner range aims to make it simple for all gas chromatographers to select the correct liner. Choosing the right inlet liner and injection parameters can increase peak areas and reduce detection limits by up to 300%.
- Easy to choose - color coded by geometry to simplify your selection.
- Easy to use - contains o-rings so you're ready to go.
- Confidence in your analysis - certified deactivation.
Features and benefits
- Straight liners facilitate higher split flows.
- Narrow bore straight liners facilitate fast GC work.
- Small injection volumes of less than 0.5 µL are best used.
- Narrow bore straight liners improve focusing of gaseous samples (purge, trap and headspace).
- Color coded purple.
Recommended applications
Straight liners are recommended for the following sample or injection modes:
- General purpose.
- Concentrated samples.
- Dirty samples (only if quartz wool is present).
- Gaseous samples.
- Purge and trap.
- Headspace.
- Split/splitless.
Product specifications
Straight liners available for Agilent, PerkinElmer, Shimadzu 2010, 17A, 2014 and 2025 injectors, Thermo Scientific, and Varian/Bruker 1177 and 1078/1079 injectors.
|
Injector |
Length (mm) |
OD (mm) |
ID (mm) |
|
Agilent |
78.5 |
6.3 |
4 |
|
Agilent |
78.5 |
6.3 |
1.2 |
|
Agilent |
78.5 |
6.3 |
2 |
|
PerkinElmer |
92 |
6.2 |
4 |
|
PerkinElmer |
92 |
6.2 |
2 |
|
PerkinElmer |
86.2 |
4 |
2 |
|
PerkinElmer |
112 |
6 |
3 |
|
PerkinElmer |
100 |
5 |
3 |
|
Shimadzu |
95 |
5 |
2.6 |
|
Shimadzu |
95 |
5 |
3.4 |
|
Thermo |
105 |
8 |
3 |
|
Thermo |
105 |
8 |
5 |
|
Thermo |
78.5 |
6.3 |
4 |
|
Varian/Bruker |
78.5 |
6.3 |
4 |
|
Varian/Bruker |
78.5 |
6.3 |
1.2 |
|
Varian/Bruker |
54 |
5 |
0.5 |
More
Please refer to the part number list for more items.
- Product Data Sheet - SGE Straight Inlet Liners [PDF]
- Part Number List - SGE Straight Inlet Liners [PDF]
SGE Tapered FocusLiner Inlet Liners
$144.90
Spot the Difference in the SGE Lineup!
The SGE inlet liner range aims to make it simple for all gas chromatographers to select the correct liner. Choosing the right inlet liner and injection parameters can increase peak areas and reduce detection limits by up to 300%.
- Easy to choose - color coded by geometry to simplify your selection.
- Easy to use - contains o-rings so you're ready to go.
- Confidence in your analysis - certified deactivation.
Features and benefits
- Bottom taper focuses sample onto the head of the column and minimizes contact with metal parts of the inlet.
- A taper at the top aids in minimizing sample flashback.
- Ensures quartz wool remains in the correct position in the liner.
- Excellent reproducibility results from the wiping of the sample from the syringe needle and the prevention of droplet formation.
- Color coded aqua.
Recommended applications
The Tapered FocusLiner® is recommended for the following sample or injection modes:
- Trace level analysis.
- Splitless.
- Dirty sample.
- Wide boiling point range.
Product specifications
Tapered FocusLiner available for Agilent, PerkinElmer, Shimadzu, Thermo Scientific, and Varian/Bruker injectors.
|
Injector |
Length (mm) |
OD (mm) |
ID (mm) |
|
Agilent |
78.5 |
6.3 |
4 |
|
Agilent |
78.5 |
6.3 |
2.3 |
|
PerkinElmer |
92 |
6.2 |
4 |
|
Shimadzu |
99 |
5 |
3.4 |
|
Shimadzu |
95 |
5 |
3.4 |
|
Thermo |
105 |
8 |
5 |
|
Thermo |
78.5 |
6.3 |
4 |
|
Thermo |
78.5 |
6.3 |
2.3 |
|
Varian/Bruker |
78.5 |
6.3 |
2.3 |
|
Varian/Bruker |
54 |
5 |
3.4 |
|
Varian/Bruker |
72 |
6.3 |
4 |
More
Please refer to the part number list for more items.
- Product Data Sheet - SGE Tapered FocusLiner Inlet Liners [PDF]
- Part Number List - SGE Tapered FocusLiner Inlet Liners [PDF]