PerkinElmer
0.5 µL NanoVolume PerkinElmer syringe with 7 cm 0.47 mm OD cone tipped needle
$115.40
View full product details
0.5 µL NanoVolume PerkinElmer syringe with 7 cm 0.63 mm OD cone tipped needle
$115.40
View full product details
5 µL fixed needle PerkinElmer syringe with 7 cm 0.47 mm OD cone tipped needle
$82.60
View full product details
5 µL fixed needle PerkinElmer syringe with 7 cm 0.63 mm OD cone tipped needle
$82.60
View full product details
5 µL fixed needle PerkinElmer syringe with gas tight plunger and 7 cm 0.47 mm OD cone tipped needle
$83.50
View full product details
5 µL fixed needle PerkinElmer syringe with gas tight plunger and 7 cm 0.63 mm OD cone tipped needle
$83.50
View full product details
50 µL fixed needle PerkinElmer syringe with 7 cm 0.63 mm OD cone tipped needle
$111.60
View full product details
Brochure - Biodiesel analysis guide
Analysis guide
Download: Brochure - Biodiesel analysis guide [PDF] View full product details
Brochure - SGE Inlet liners
SGE Inlet liners
Spot the difference in the SGE lineup
Download: Brochure - SGE Inlet liners [PDF] View full product details
Brochure - Syringes for the laboratory
Download: Brochure - Syringes for the laboratory [PDF]
Also see: Brochure - GC consumables
View full product details
Graphite Ferrules with 0.5 mm Hole For use with 1/8" Nuts on PerkinElmer Injectors & Detectors, PK10
$31.70
View full product details
Graphite Ferrules with 1.0 mm Hole For use with 1/8" Nuts on PerkinElmer Injectors & Detectors, PK10
$31.70
View full product details
Manual - Instructions for PerkinElmer MS SilTite FingerTite kit
Download: Manual - Instructions for PerkinElmer MS SilTite FingerTite kit [PDF] View full product details
Manual - Instructions for PerkinElmer SilTite FingerTite kit
Download: Manual - Instructions for PerkinElmer SilTite FingerTite kit [PDF] View full product details
Part Number List - Graphite GC ferrules
Download: Part Number List - Graphite GC ferrules [PDF]
Also see: Product Data Sheet - Graphite GC ferrules
Find in table:
| Part number | Part description and detail |
|---|---|
| For use on Agilent and Thermo Scientific TRACE 1300 Series GC injectors and detectors at atmospheric pressure e.g. FID | |
| 072601 | Graphite short ferrule with 1/4" hole for 1/4" fittings, Bruker/Varian 1075 and 1077 injection port liners, unions, and 1/4" OD packed columns, PK10 |
| 072602 | Graphite short ferrule with 1/8" hole for 1/8" fittings, unions, and 1/8" OD packed columns, PK10 |
| 072635 | Graphite short reducing ferrule with 0.5 mm hole for detector/injectors (not for MSD interface connections), PK10 |
| 072636 | Graphite short reducing ferrule with 0.8 mm hole for detector/injectors (not for MSD interface connections), PK10 |
| For use on Bruker/Varian GC injectors and detectors at atmospheric pressure e.g. FID | |
| 072627 | Graphite ferrule with 0.5 mm hole for 1/16" fittings, PK10 |
| 072626 | Graphite ferrule with 0.8 mm hole for 1/16" fittings, PK10 |
| 072622 | Graphite ferrule with 1/8" hole for 1/8" OD packed columns, PK10 |
| 072621 | Graphite ferrule with 1/4" hole for 1/4" OD packed columns, PK10 |
| For use on Shimadzu GC-2014, GC-2010, GC-17A and GC-14A injectors/detectors (not for MS interfaces or QP2010 injector) | |
| 0726080 | Graphite ferrule with 0.5 mm hole for GC14A, GC17A, GC2010 and GC2014 detector/injectors |
| 0726082 | Graphite ferrule with 0.8 mm hole for GC14A, GC17A, GC2010 and GC2014 detector/injectors |
| 0726001 | Graphite sealing ring with 5 mm hole for Shimadzu 14, 15A and 16 (Spl-14 injector) liners and 5 mm OD packed columns, PK10 |
| For use on Thermo Scientific TRACE GC ultra and FOCUS GC injectors and detectors at atmospheric pressure e.g. FID | |
| 072619 | Graphite ferrule with 0.5 mm hole for Carlo Erba detector/injectors |
| 072614 | Graphite ferrule with 0.8 mm hole for Carlo Erba detector/injectors |
| 072622 | Graphite ferrule with 1/8" hole for 1/8" OD packed columns, PK10 |
| 072621 | Graphite ferrule with 1/4" hole for 1/4" OD packed columns, PK10 |
| For use on PerkinElmer injectors and detectors at atmospheric pressure e.g. FID | |
| 072627 | Graphite ferrule with 0.5 mm hole for 1/16" fittings, PK10 |
| 072624 | Graphite ferrules with 0.5 mm hole for use with 1/8" nuts on PerkinElmer injectors and detectors, PK10 |
| 072626 | Graphite ferrule with 0.8 mm hole for 1/16" fittings, PK10 |
| 0726280 | Graphite ferrules with 1.0 mm hole for use with 1/8" nuts on PerkinElmer injectors and detectors, PK10 |
| 072622 | Graphite ferrule with 1/8" hole for 1/8" OD packed columns, PK10 |
| 072621 | Graphite ferrule with 1/4" hole for 1/4" OD packed columns, PK10 |
| Standard ferrule solutions - 1/16" fitting specification | |
| 072603 | Graphite short ferrule with 1/16" hole for 1/16" fittings, unions, PK10 |
| 072606 | Graphite short reducing ferrule with 1.2 mm hole for 1/16" fittings, PK10 |
| 072607 | Graphite short reducing ferrule with 1 mm hole for 1/16" fittings, PK10 |
| 072608 | Graphite short reducing ferrule with 0.8 mm hole for 1/16" fittings, PK10 |
| 072610 | Graphite short reducing ferrule with 0.5 mm hole for 1/16" fittings, PK10 |
| 072623 | Graphite ferrule with 1/16" hole for 1/16" fittings, PK10 |
| 072625 | Graphite ferrule with 1.0 mm hole for 1/16" fittings, PK10 |
| Standard ferrule solutions - 1/8" fitting specification | |
| 0726270 | Graphite ferrule with 0.8 mm hole for 1/8" fittings, PK10 |
| 072628 | Graphite ferrule with 1.2 mm hole for 1/8" fittings, PK10 |
| 0726283 | Graphite ferrule with 1/16" hole for 1/8" fittings, PK10 |
| 072609 | Graphite short reducing ferrule with 1.2 mm hole for 1/8" fittings, PK10 |
| Standard ferrule solutions - 1/4" fitting specification | |
| 072604 | Graphite short reducing ferrule with 6 mm hole for 1/4" fittings, PK10 |
| 0726151 | Graphite short reducing ferrule with 1/8" hole for 1/4" fittings, PK10 |
| 072617 | Graphite short reducing ferrule with 5/16" hole for 1/4" fittings, PK10 |
| 0726212 | Graphite reducing ferrule with 6 mm hole for 1/4" fittings, PK10 |
| 0726281 | Graphite ferrule with 1/8" hole for 1/4" fittings, PK10 |
| 0726282 | Graphite ferrule with 1/16" hole for 1/4" fittings, PK10 |
| Other ferrules | |
| 072629 | Replacement mini union graphite ferrules with 0.8 mm hole, PK10 |
| 072630 | Replacement mini union graphite ferrules with 0.5 mm hole, PK10 |
| 072605 | Graphite short ferrule with 5 mm hole for 5 mm fittings, PK10 |
| 072613 | Graphite short ferrule with 1/2" hole for 1/2" fittings, PK10 |
| 072615 | Graphite short ferrule with 3/8" hole for 3/8" fittings, PK10 |
| 0726217 | Graphite sealing ring for Varian 1078 and 1079 injectors, PK10 |
Part Number List - Graphite/Vespel® GC ferrules
Download: Part Number List - Graphite/Vespel® GC ferrules [PDF]
Also see: Product Data Sheet - Graphite/Vespel® GC ferrules
Find in table:
| Part number | Part description and detail |
|---|---|
| 072694 | 15% Graphite/85% Vespel mini union ferrule with no hole, PK10 |
| 072695 | 15% Graphite/85% Vespel mini union ferrule with 0.3 mm hole, PK10 |
| 072696 | 15% Graphite/85% Vespel mini union ferrule with 0.4 mm hole, PK10 |
| 072697 | 15% Graphite/85% Vespel mini union ferrule with 0.5 mm hole, PK10 |
| 072698 | 15% Graphite/85% Vespel mini union ferrule with 0.8 mm hole, PK10 |
| 072671 | 15% Graphite/85% Vespel ferrule with 0.8 mm hole for 1/8" fitting, PK10 |
| 072674 | 15% Graphite/85% Vespel ferrule with 2 x 0.8 mm holes for 1/8" fitting, PK10 |
| 072673 | 15% Graphite/85% Vespel ferrule with 1/16" hole for 1/4" fitting, PK10 |
| For use on Agilent GC injectors and detectors at atmospheric pressure e.g. FID |
|
| 073105 | 15% Graphite/85% Vespel short ferrule with no hole, PK10 |
| 073107 | 15% Graphite/85% Vespel short ferrule with 0.3 mm hole, PK10 |
| 073109 | 15% Graphite/85% Vespel short ferrule with 0.4 mm hole, PK10 |
| 073111 | 15% Graphite/85% Vespel short ferrule with 0.5 mm hole, PK10 |
| 073113 | 15% Graphite/85% Vespel short ferrule with 0.8 mm hole, PK10 |
| For use on Agilent GCMS interface | |
| 072663 | 15% Graphite/85% Vespel ferrule with 0.4 mm hole, PK10 |
| 072654 | 15% Graphite/85% Vespel ferrule with 0.5 mm hole, PK10 |
| 072655 | 15% Graphite/85% Vespel ferrule with 0.8 mm hole, PK10 |
| For use on Bruker/Varian GC injectors and detectors at atmospheric pressure e.g. FID |
|
| 072663 | 15% Graphite/85% Vespel ferrule with 0.4 mm hole, PK10 |
| 072654 | 15% Graphite/85% Vespel ferrule with 0.5 mm hole, PK10 |
| 072655 | 15% Graphite/85% Vespel ferrule with 0.8 mm hole, PK10 |
| For use on PerkinElmer GC injectors and detectors at atmospheric pressure e.g. FID with 1/16" nut |
|
| 072663 | 15% Graphite/85% Vespel ferrule with 0.4 mm hole, PK10 |
| 072654 | 15% Graphite/85% Vespel ferrule with 0.5 mm hole, PK10 |
| 072655 | 15% Graphite/85% Vespel ferrule with 0.8 mm hole, PK10 |
| For use on PerkinElmer GC injectors and detectors at atmospheric pressure e.g. FID with 1/8" nut | |
| 0726703 |
15% Graphite/85% Vespel ferrule with 0.4 mm hole for 1/8" fitting, PK10 |
| 0726702 |
15% Graphite/85% Vespel ferrule with 0.5 mm hole for 1/8" fitting, PK10 |
| 072671 |
15% Graphite/85% Vespel ferrule with 0.8 mm hole for 1/8" fitting, PK10 |
| For use on Shimadzu QP5000-I standard MS interface |
|
| 0726563 | 15% Graphite/85% Vespel ferrule with 0.4 mm hole, PK10 |
| 0726564 | 15% Graphite/85% Vespel ferrule with 0.5 mm hole, PK10 |
| For use on Shimadzu QP5000-II/5050 standard MS interface |
|
| 0726561 |
15% Graphite/85% Vespel ferrule with 0.4 mm hole, PK10 |
| 0726562 |
15% Graphite/85% Vespel ferrule with 0.5 mm hole, PK10 |
| 0726547 |
15% Graphite/85% Vespel ferrule with 0.8 mm hole, PK10 |
| For use on Shimadzu QP5000/5050 wide bore MS interface, QP2010 injector and QP2010 standard MS interface |
|
| 072663 | 15% Graphite/85% Vespel ferrule with 0.4 mm hole, PK10 |
| 072654 | 15% Graphite/85% Vespel ferrule with 0.5 mm hole, PK10 |
| 072655 | 15% Graphite/85% Vespel ferrule with 0.8 mm hole, PK10 |
| For use on Thermo Scientific TRACE 1300 Series GC at atmospheric pressure e.g. FID |
|
| 073105 | 15% Graphite/85% Vespel short ferrule with no hole, PK10 |
| 073107 | 15% Graphite/85% Vespel short ferrule with 0.3 mm hole, PK10 |
| 073109 | 15% Graphite/85% Vespel short ferrule with 0.4 mm hole, PK10 |
| 073111 | 15% Graphite/85% Vespel short ferrule with 0.5 mm hole, PK10 |
| 073113 | 15% Graphite/85% Vespel short ferrule with 0.8 mm hole, PK10 |
| For use on Thermo Scientific GCMS interface |
|
| 072663 | 15% Graphite/85% Vespel ferrule with 0.4 mm hole, PK10 |
| 072654 | 15% Graphite/85% Vespel ferrule with 0.5 mm hole, PK10 |
| 072655 | 15% Graphite/85% Vespel ferrule with 0.8 mm hole, PK10 |
| Standard ferrule solutions - 1/16" fitting specification |
|
| 0726632 |
15% Graphite/85% Vespel ferrule with 0.2 mm hole for 1/16" fitting, PK10 |
| 0726591 |
15% Graphite/85% Vespel Vg/Micromass ferrule with 0.3/0.4 mm hole for 1/16" fitting, PK10 |
| 0726650 |
15% Graphite/85% Vespel ferrule with 3 x 0.3 mm holes for 1/16" fitting, PK10 |
| 0726641 |
15% Graphite/85% Vespel ferrule with 1 x 0.4 mm hole and 1 x 0.3 mm hole for 1/16" fitting, PK10 |
| 0726640 |
15% Graphite/85% Vespel ferrule with 1 x 0.5 mm hole and 1 x 0.3 mm hole for 1/16" fitting, PK10 |
| 0726642 |
15% Graphite/85% Vespel ferrule with 1 x 0.5 mm hole and 1 x 0.4 mm hole for 1/16" fitting, PK10 |
| Standard ferrule solutions - 1/8" fitting specification |
|
| 0726703 |
15% Graphite/85% Vespel ferrule with 0.4 mm hole for 1/8" fitting, PK10 |
| 0726702 |
15% Graphite/85% Vespel ferrule with 0.5 mm hole for 1/8" fitting, PK10 |
| 072674 |
15% Graphite/85% Vespel ferrule with 2 x 0.8 mm holes for 1/8" fitting, PK10 |
| 0726701 |
15% Graphite/85% Vespel ferrule with 1/16" hole for 1/8" fitting, PK10 |
| 0726700 |
15% Graphite/85% Vespel ferrule with 2.4 mm hole for 1/8" fitting, PK10 |
| Standard ferrule solutions - 1/4" fitting specification |
|
| 0726660 |
15% Graphite/85% Vespel ferrule with 0.5 mm hole for 1/4" fitting, PK10 |
| 072673 |
15% Graphite/85% Vespel ferrule with 1/16" hole for 1/4" fitting, PK10 |
| 0726673 |
15% Graphite/85% Vespel ferrule with 6 mm hole for 1/4" fitting, PK10 |
