CRS SPure™ H₂O gas filters

CRS gas purifiers and filters

Pure gas is a critical requirement in gas chromatography, spectroscopy, optics, lithography, and numerous other applications in manufacturing and analytical laboratories. The SPure™ H2O filters remove moisture, oil and dust from air and inert gases.

Features and benefits

  • High-strength polycarbonate and acrylic bodies with aluminum end caps.
  • Available with standard brass and stainless steel compression fittings.
  • Not recommended for house compressed air lines or for GC carrier gases.
  • Not for use with hazardous, flammable, or reactive gases.

Recommended applications

It can be used to remove moisture, oil and dust from air and inert gases. It is suitable for general purpose, non-critical laboratory use.

Product specifications

SPure H2O

Volume Function Capacity (nominal-max) Flow rate (nominal-max) Max pressure Dimensions Fittings Body material
88 cc Removes water, oil and dust 6.3 - 11.0 g water 0.680 - 6.8 SLPM 6.89 bar / 100 psi 3.8 cm x 26.3 cm 1/8" and 1/4" brass and stainless steel compression Polycarbonate
116 cc 8.3 - 14.4 g water 0.900 - 9.0 SLPM 3.8 cm x 31.8 cm Polycarbonate
240 cc 17.2 - 29.9 g water 1.85 - 18.5 SLPM 5.6 cm x 28.5 cm Acrylic
400 cc 28.6 - 49.8 g water 3.0 - 30.0 SLPM 5.6 cm x 41.9 cm Acrylic

1) The nominal water capacity is determined for an inlet impurity level of 200 ppm H2O. The maximum water capacity is determined for an inlet impurity level of 10000 ppm H2O.
2) Nominal flow rate is the recommended flow rate for an estimated gas purifier life of 1 year. This assumes the following inlet impurities: 1 ppm H2O. The maximum recommended flow rate is recommended for intermittent use only.

More

Please refer to the part number list for more items.

For technical information such as manuals and MSDS please visit chromres.com/resources.

More information