LEAP PAL seal cap kit
Part number: PAL.KITSEALCAP
Image is representative (may not be specific item).
$52.50
Seal cap kit for PAL solvent and wash vials
This kit comes with 10 caps and 10 seals to fit 100-WV solvent bottles or PAL WashStd1 solvent vials.
Product specifications
The seals are pre-slit for repeated use with PAL systems, and should be replaced when visibly worn or at 6 month intervals.These caps work with both PAL3 autosampler and xt-system bottles and vials.
Related Items
Brochure - Syringes for LEAP autosamplers
The perfect match for your instrument
Download: Brochure - Syringes for LEAP autosamplers [PDF] View full product details
LEAP PAL power supply module
$820.00 $995.00
Power supply for PAL-xt and PAL3 systems
Power supply module for all PAL-xt autosampler models and PAL3 systems.
Product specifications
Power: 150 watt
Input voltage: 100 V - 240 V
LEAP PAL tension cords
$18.50
Tension cords for PAL-xt and legacy PAL autosamplers
One-piece tension cord (also referred to as bungee cord) for PAL-xt models and earlier.
Product specifications
Two sizes are available, 90 mm and 280 mm, and both should purchased at the same time.
It is recommended to replace the tension cords annually, as part of your preventative maintenance program. The cords should also be replaced if you notice your xt or legacy model PAL autosampler has started to bend syringe needles.
View full product details
ProDx trap columns
ProDx consumables are specifically designed and developed for use with the LEAP HDX platform.
ProDx trap columns are optimized for maximum recovery of peptide fragments, efficient desalting and low backpressures during the digestion and elution processes of HDX runs.
While many columns used for HDX trapping are not designed for use with low temperature HDX systems, ProDx trap columns are designed to operate down to 0°C, with consistent recovery, and demonstrate reduced backpressure at standard conditions of 200 μL/min, 100% Aqueous and 0°C, lowering instances of leakage and need for troubleshooting.
ProDx trap columns are pre-configured with PEEKsil® lines for ease of use, reducing the number of fittings needed in the system, preventing issues that commonly occur when relying on other columns with multiple connections.
To ensure confidence in your data, combine the ProDx Protease and trap columns for your HDX work
Features and benefits
- High recovery of peptide fragments generated by inline digestion
- Does not interfere with analytical separation
- Low temperature operation optimized at 0°C
- Lower carryover and increased desalting efficiency
- PEEKsil lines for reduced backpressure and leakage
- End frits designed to prevent rapid blocking by intact proteins and aggregates
- Phase and pore size to suit your analysis
Recommended applications
Automated Hydrogen-Deuterium Exchange (HDX) experiments using the LEAP HDX platform.
Product specifications
ProDx columns were developed specifically for use with the LEAP HDX system. ProDx trap columns are designed to protect the ProDx analytical column.
- ID configuration: 0.5 mm
- Length configuration: 20 mm
Currently available in C8 Analog*, with performance similar to C18 materials, suitable for reversed-phase separation of biomolecules such as proteins and peptides.
Fittings for ProDx trap columns
Choice of fittings available with ProDx trap columns, for low to ultra high pressure applications.
ProteCol® PEEK Fingertight fittings are precision manufactured to complement your HPLC needs.
| ProteCol® PEEK Fingertight HPLC fittings | Pressure rating | Maximum operating pressure rating when used with ProDx trap columns |
| 1/16" to 10-32 UNF (long) | 5,000 psi (345 bar) | 5,000 psi (345 bar) |
| 1/32" to 6-40 UNF | 2,750 psi (190 bar) | 2,750 psi (190 bar) |
PEEKLok™ UHPLC fittings are designed specifically for PEEKsil tubing: reliable, affordable, and easy to use, holding up to 22,000 psi; or up to 15,000 psi when used with ProDx trap columns.
| PEEKLok™ UHPLC fittings | Pressure rating | Maximum operating pressure rating when used with ProDx trap columns |
| 1/16" to 10-32 UNF | 22,000 psi (>1,500 bar) | 15,000 psi (1,000 bar) |
| 1/32" to 6-40 UNF | 22,000 psi (>1,500 bar) | 15,000 psi (1,000 bar) |
More
Please refer to the part number list for more items.
*This product contains POROS® material used under license for Sample Prep purposes from Life Technologies Corporation, a subsidiary of Thermo Fisher Scientific, Inc. The POROS® Trademark is owned by Thermo Fisher Scientific, Inc.
View full product details